Provision a BGP Peer Group

You can configure a BGP peer group.

About this task

Complete the following tasks to configure a BGP peer group in your XCO fabric:

Procedure

  1. Create a BGP Peer Group
  2. Configure IP Prefix List and Route Map on Tenant BGP Peer Group
  3. Configure Send-Community on Tenant BGP Peer Group
  4. Add Path on Tenant BGP Peer Group
  5. Configure remove-private-as on BGP Peer Group
  6. Activate Peer Group on Tenant BGP
  7. Delete Pending BGP Peer Group Configuration
  8. Configure IPv6 Address as Update Source
9038968-00 Rev AB